Double Barrel® Dryer/Drum Mixer

  • Image 02
  • Image 03

Astec brings you the Double Barrel dryer/drum mixer, the mixer of choice over any other. The Double Barrel dryer/drum mixer combines the latest in hot and warm mix technology with other great Astec features. Get guaranteed productivity and top quality mixes, while keeping operating costs per ton of mix low and meeting the most stringent environmental codes. Relocatable and portable versions all perform to the same high standards.

Features & Benefits

  • The Double Barrel's unique design uses the entire drum for production of RAP to 50%.
  • Sequential mixing allows better temperature equalization throughout the mix.
  • Patented V-Flights provide greater uniformity of the aggregate veil through the gas stream during the drying process across a wide variety of mix designs and tonnage rates.
  • Self-cleaning drum reduces buildup in the mixing chamber.
  • Hydraulic door provides safe access to the outer mixing chamber from the ground.
  • Compatible with Astec warm mix systems.

Double Barrel® Relocatable (Up to 50% RAP)

Drum Size Mixing Chamber TPH (MTPH)
6’ x 33’ (1.8m x 10m) 19’ (5.8m) 200 TPH (181 MTPH)
7’ x 38’ (2.1m x 11.6m) 22’ (6.7m) 300 TPH (272 MTPH)
8’ x 41’ (2.4m x 12.2) 22.5’ (6.9m) 400 TPH (363 MTPH)
9’ x 47’ (2.7m x 14.3m) 22.5’ (6.9m) 500 TPH (454 MTPH)
10’ x 50’ (3m x 15.2m) 22.5’ (6.9m) 600 TPH (544 MTPH)

Double Barrel® Portable (Up to 50% RAP)

Drum Size Mixing Chamber TPH (MTPH)
6’ x 33’ (1.8m x10m) 19’ (5.8m) 200 TPH (181 MTPH)
7’ x 37’ (2.1m x 11m) 19’ (5.8m) 300 TPH (272 MTPH)
8’ x 38’ (2.4m x 11.6m) 21’ (6.4m) 400 TPH (363 MTPH)

Double Barrel

As aggregate enters the drum from the conveyor, it passes through the flop gate, which minimizes air leakage into the drum. From there, it passes through a series of veiling flights that transfer the heat from the burner to the aggregate. The aggregate then exits the inner drum, dropping down into the outer drum shell, where paddles sequentially mix in RAP, liquid AC, and dust/filler in a flame free environment. In this zone, the constituents are mixed for the remainder of the drum length before exiting to the drag.

Inlet Feed Chute

  • The 66° gravity inlet chute is lined with ceramic tiles to minimize wear to the chute.
  • A sealed flop gate minimizes air leaking into the baghouse. Minimizing air leakage is important, because excessive air leakage will result in decreased production.
  • Slinger feeder also available.


1.) Virgin Material Enters

2.) Final Mix Exits


Aggregate Entry
Recycle Entry
Baghouse Dust Entry
Final Mix Exit

Double Barrel
DRYING (Inner Drum)

The Astec Double Barrel dryer/drum mixer is designed to move aggregate through the mix process with maximum efficiency. Drying of the virgin aggregate is the first step in the process and takes place in the inner drum. The drying process begins when the virgin aggregate enters the inner drum through a sealed gravity chute. The flop gate restricts air entry into the drum while allowing the aggregate to pass through. The angle of the ceramic-lined inlet chute keeps material flowing freely into the drum. State-of-the-art flights move the material through the drying zones. Once dried and heated, the aggregate leaves the drum through exit openings and enters the outer mixing chamber.

Longer Drying Chamber

The Double Barrel dryer/drum mixer features the industry's longest drying chamber. The entire length of the drum is used for drying virgin aggregate. The long drying chamber assures that the virgin aggregate has adequate time for thorough drying.

1.) Virgin Material Enters

2.) Conditioning Flights

Break up any clumps or sticky material when the aggregate first enters drum.

Fine material has a tendency to clump together in clusters when wet, particularly in the presence of clays. The conditioning flights break up these clumps to ensure all particles will shower evenly.

3.) V-Flights

Provide greater uniformity of the aggregate veil through the gas stream during the drying process, across a wide variety of mix designs and tonnage rates.

The v-shaped notch in the flights allows material to start pouring out of the flight at the beginning of revolution. The material in the bucket continues to pour out until the rotation is complete. This is what provides the even veil of material. The v-flight is also larger than the standard flight, allowing it to carry the same amount of aggregate even with the notch.

U.S. Patent No. 9,835,374

4.) Combustion Flights

Prevent aggregate from impinging on the flame while spreading the material to maximize radiant heat transfer.

The combustion flights are made of stainless steel, which lasts much longer than traditional carbon steel. The flights overlap one another, creating a shield that minimizes the radiant heat that hits the drum shell to keep it from overheating.

Double Barrel
MIXING (Outer Drum)

Adding materials in sequential order, and at the right time, is the key to making good mix on a consistent basis. That’s where the Astec Double Barrel dryer/drum mixer’s exclusive sequential mixing process excels. Ingredients are added to the mixture in an order that allows better temperature equalization and even distribution of all particles throughout the mix.

Longer Mixing Chamber

Astec’s extraordinarily long mixing chamber allows long mixing times. Long mixing times, together with Astec’s sequential mixing, ensure uniform and consistent incorporation of all mix materials.

Sequential mixing ensures ingredients are added to the hot mixture in an order that allows better temperature equalization and even distribution of all particles throughout the mix.
Sequential Mixing (Step 1)

1.) Recycle Entry

RAP (Recycled Asphalt Pavement) material is added to the aggregate in the mixing chamber.

First in the mixing sequence, recycle enters into the mixing chamber through the recycle inlet. Recycle, which may be RAP, roofing shingles, crumb rubber, or a mixture thereof, is heated by contact with the hot virgin aggregate.

Sequential Mixing (Step 2)

2.) Liquid Asphalt Entry
(Optional warm mix system shown)

Liquid asphalt is injected into the mixing chamber through the AC inlet or optional Warm Mix System.

At the point where virgin and recycled materials are at the proper temperature and thoroughly mixed, liquid asphalt cement (AC) is injected into the mixing chamber. As the mix moves through the mixing chamber, it is continually stirred by mixing paddles.

Sequential Mixing (Step 3)

3.) Baghouse Dust Entry
(On opposite side)

Baghouse fines are added last, so they do not absorb the liquid AC before it is distributed on the aggregate.

Finally, baghouse fines and other additives enter the mixing chamber and become embedded in the thick layer of asphalt coating the rock. Astec’s sequential mixing keeps fines from soaking up more than their share of AC, because the AC has been well distributed before fines are added.

Gas Flow
Hydrocarbons and Steam

There is a continuous release of steam as the RAP is introduced and heated. This is one of the keys to the success of the Double Barrel dryer/drum mixer as a processor of RAP – steam blankets the superheated virgin aggregate and RAP, displacing oxygen. As a result there is less oxidation of the mix.

As the RAP dries, blue smoke emissions can also be produced along with steam. Steam and blue smoke are pulled into the burner flame by the baghouse fan. The hydrocarbons in the blue smoke are incinerated, while the steam simply passes to the baghouse and out of the exhaust stack.

As recycle heats in the mixing chamber by contact with the hot aggregate, moisture in the recycle is driven off as steam. Steam displaces oxygen in the mixing chamber, reducing the potential for mix oxidation.

Steam from the Double Barrel dryer/drum mixer is passed to the baghouse and out the exhaust stack.

1.) RAP enters drum

2.) Heated virgin aggregate and RAP generate steam and blue smoke

3.) Steam and hydrocarbons are pulled into the flame

4.) Burner flame incinerates the hydrocarbon smoke

5.) Steam, dust and fines exit drum through exhaust stack to the baghouse

Pulse Jet Baghouse

Pulse jet baghouses remove particulates from the exhaust stream to efficiencies greater than 99.95%, and typically lower emissions to less than one quarter of EPA standards. During the cleaning mode, blowpipes direct bursts of compressed air into two rows of bags at a time. The shock and momentary back-flow produced by the compressed air pulse causes the bags in the section to expand and expel the collected dust cake from the surface, allowing it to drop into the hopper.

†Emission performance is typical, but not guaranteed.

Reverse Pulse Baghouse

Reverse pulse baghouses utilize a damper and a rotating turret to force air directly into the bag filters opposite the normal flow direction. Cleaning is accomplished by isolating a single section of filter bags then reversing the flow of air through them causing gentle expansion. Accumulated dust dislodges from the bag filters and drops into the hopper beneath. Cleaning sequence and timing is adjustable from the control house.

Double Barrel
Features (Inner Drum)

After hundreds of millions of tons of mix production, the Astec Double Barrel dryer/drum mixer proves itself to be the most reliable and cost effective dryer/drum mixer available to producers.

Each trunnion base is angled to the frame, so that a dowel pin in the base is in line with the exact center of the drum. The trunnion base pivots around the pin, making it easy to maintain face contact between the tire and trunnion while making adjustments. Good trunnion alignment means better performance and longer equipment service life.

Two solid-steel tires encompass the drum and support the Double Barrel dryer/drum mixer.

A saddle chain drive is outfitted with a heavy-duty roller chain, including offset sidebars and case-hardened bushings. These heavy-duty drive components are made to last.

1.) Silencer
2.) Burner
3.) Trunnion

4.) Drop Out Holes to Outer Mixing Drum
5.) High-chrome Mixing Paddles with Ductile Iron Shanks
6.) Self-cleaning system

7.) Sprocket and Saddle Chain
8.) Drive Motor (trunnion drive available)
9.) Butterfly Spokes

10.) Drum Tire
11.) Trunnion
12.) Access Door to Inner Drum

Adjustable steel trunnions with railroad duty bearings
Drum Tires
Hot-forged from solid billets of alloy steel and precision machining, provides ultra-smooth operation
Thrust Rollers
Thrust rollers on either side of the tire restrain the drum
Dryer Access
The interior of the dryer drum is accessed through a door on the inlet breeching

Double Barrel
Features (Outer Drum)

The cost of maintaining the Double Barrel dryer/drum mixer is comparatively low, because Astec uses proven wear materials. High-chrome, heat-treated, mixer paddle tips and wear plates in the mixing zone stand up to ton after ton of abrasive material. The burner end of the drum, as well as the mixing chamber outershell, are fabricated from a high-strength, low-alloy steel for superior heat-resistance and lined with wear plates at critical wear areas.

Mixing Paddles

High-chrome, bolt-on tips with ductile iron shanks for longevity in the field.

1.) RAP Entry

2.) Stainless Steel Skin With Insulation

3.) Infrared Aggregate Temperature Sensor

4.) Hydraulic Access Door

5.) Mix Discharge Chute

RAP Inlet
RAP enters directly into the mixing chamber and does not contact the hot gas stream of the dryer. Because the RAP is heated by the hot aggregate, not the burner, the Double Barrel dryer/drum mixer runs clean, even at 50% RAP. A RAP by-pass chute is incorporated to easily divert RAP to a waiting loader or truck during clean out of bins or calibration.
Thick Insulation
4" thick insulation under the outer skin of the mixing chamber minimizes heat loss and increases efficiency. In addition, temperature resistant ceramic fiber insulation is used in critcal high-heat areas.
Temperature Sensor
Once heated and dried, the aggregate leaves the drying chamber and enters the mixing chamber. At this point, an infrared sensor measures the temperature of the hot aggregate and automatically adjusts burner output to keep aggregate at the required temperature. This unique Astec feature makes it easier to control mix temperatures and to turn out mixes that conform to specifications.
Hydraulic Access Door
A large hydraulically operated access door allows easy service of mixing shanks and tips from the outside of the drying drum.