The Astec HMA facility product line is designed to fit the needs of today's producers. Continuous-mix plants come in portable, relocatable and stationary versions. Batch plants, targeted at the export market and certain domestic applications, are engineered to fit a variety of needs. This complete line of plants, and its range of capacities and features, give Astec customers the choices and flexibility to create their optimum solution.

  • Astec Nomad Asphalt Plant

    Nomad™ Asphalt Plants

    Nomad plants are available in three sizes, designed for maximum production capacities of 72, 118, or 159 metric tons per hour (80, 130, or 175 TPH). Intended for portability, durability, and reliability, Nomad plants meet the demands of a variety of small, medium and large projects that require quality hot mix asphalt.

    Read more...

  • Astec Voyager Asphalt Plant

    Voyager™ Asphalt Plants

    The Voyager 120 offers a compact, highly portable design. Unique for a plant in this class with the ability to run up to 30% RAP. In addition, it is backed by the best service support in the industry.

    The ASTEC Voyager 120 is built around a counter flow drum featuring ASTEC v-fights. The v-flights provide greater uniformity of the aggregate veil during the drying process, which results in better heat transfer, a reduction of fuel use and increased productivity.

    Read more...

  • Astec Six Pack Asphalt Plant

    Six Pack® Asphalt Plants

    The latest standard Six Pack portable HMA plants come with a Double Barrel® drum mixer, cold feed, scalping screen with inclined conveyor, baghouse, surge bin, drag conveyor and control house. The baghouse load also holds the inertial dust collector. One load handles the SEB and drag conveyor. All ship complete with duct work, dust screws, electrical switch gear, cables, and plant controls. We also supply RAP bins, fuel tanks, lime mixers and AC tanks.

    Read more...

  • Astec M-Pack Asphalt Plant

    M-Pack® Asphalt Plants

    Astec designed a facility for customers who don’t need to move often and still want to reap the benefits of faster and more economical setup. The M-Pack is engineered as a set of modules, which are transported by truck and bolted up at the site. Astec tests each component before shipping it to your site to ensure a hassle free setup. Plus, the M-Pack gives you full-size control rooms, large silos, high production capacity, and excellent maintenance access.

    Read more...


Additional Equipment

  • Stationary Drum Plants

    • Astec stationary asphalt plant
    • Astec sationary asphalt plant
    • Astec stationary asphalt plant
    • Astec stationary asphalt plant

    Astec stationary plants are suitable for permanent installations, especially when the highest production volumes are required. They allow flexibility for future add-ons as the needs of the contractor change. Stationary plants can accommodate unconventional plant layouts.

    Components are supplied with steel legs to grade. Concrete foundations hold the legs and support the components.

    Stationary plants are outfitted with Double Barrel® drum mixers and storage silos are used to hold the mix. Like Astec portable and relocatable plants, Astec stationary plants are equipped with many, innovative features not available anywhere else. Astec pollution and noise control equipment include load out tunnels, systems that capture hydrocarbon vapors, stack silencers, and burner blower silencers. This technology makes these permanent facilities good neighbors in their communities.

    Astec leads the way with attractive, stationary asphalt plants that offer clean, trouble-free operation.

  • Stationary Batch Plants

    • Astec stationary batch asphalt plant
    • Astec stationary batch asphalt plant
    • Astec stationary batch asphalt plant
    • Astec stationary batch asphalt plant

    The batch plant is ideal for metropolitan areas requiring a large number of different mixes. Instead of a continuous mixer, these facilities use a batch tower. Bins in the top section of the tower hold dried aggregate in various sizes. Depending upon the mix needed, the bins automatically dispense the correct amount of the required aggregate. The dry material is routed to a pugmill mixer located at the bottom of the tower. Here the liquid asphalt is added. After thorough mixing, the bottom of the mixer opens and the batch is dispensed into a truck or conveyed to a storage silo.

    Depending on the model Astec batch plants produce 45 to 500 tons of HMA per hour. Three model series are offered: TS, Super and BGA. Super towers and TS towers are similar in design. The larger Super tower includes extra-large aggregate bins. BGA towers are based on the proven Barber Greene design for which Astec retains all rights. BGA models are smaller in size.

    Astec batch plants are the most modern, most rugged and most dependable in the world.

  • Recycle Batch Plants

    • Astec recycle batch plant
    • Astec recycle batch plant
    • Astec recycle batch plant
    • Astec recycle batch plant

    A uniquely designed batch plant is offered in the full range of batch plant sizes with varying volumes of hot bin storage. With this design, recycled material is blended with the superheated, virgin aggregate in the bucket elevator and is conveyed to the top of the tower. This allows the operator the versatility to process recycle percentages from 0% to 40% and switch from recycle mixes to virgin mixes without emptying the hot bins.

  • Batch Drum Plants

    • Astec batch drum asphalt plant
    • Astec batch drum asphalt plant
    • Astec batch drum asphalt plant
    • Astec batch drum asphalt plant

    A Double Barrel® mixer can be set up in combination with a batch tower for maximum versatility. This enables the facility to produce a variety of batch mixes and high volumes of continuous mixes using RAP. The counterflow dryer section of the Double Barrel dries all the aggregate. A special diverter gate routes the aggregate leaving the dryer section. Astec storage technology added to the plant gives the producer the possibility to sell a wide range of HMA products.

  • Coater II Plants

    • Astec coater II for a batch asphalt plant

    A batch plant with an Astec Coater II can run two HMA production lines, one mixing in batches and the other in continuous runs. The dual-shaft Coater II comes in nine different sizes. Coaters can produce up to 725 tons per hour. These facilities are also outfitted with either a surge bin or a storage silo, a diverter chute for the dryer, weigh bridges for the cold feed bins, and related controls. Existing batch facilities can be retrofitted with the coater as a stand-alone unit.

From bins to conveyors and sampling devices, Astec material handling equipment stands up to abrasive material and is built to perform. This equipment is available in sizes and configurations to suit any type of Hot Mix Asphalt (HMA) facility. Custom design for special installations is offered, and a wide variety of options can be supplied. Feed rates can be computer controlled and governed by the central facility control.

  • Astec cold feed system

    Cold Feed Systems

    Standard features - such as the protected walkway access at the backside of the belt feeders, steeper bins with better flow and cable trays - give you even more value for your money. We build every piece of our asphalt plants, including our bins, to be the most durable, productive and user-friendly you will find.

    Read more...

  • Astec recycle system

    Recycle Systems

    Take advantage of the savings realized through the use of recycled asphalt pavement (RAP) with Astec RAP systems. The systems are offered in a range of configurations, with a variety of conveyors, screens, grizzlies and crushers. The simplest system consists of one bin, a scalping screen and a conveyor that goes directly to the drum mixer.

    Read more...


Additional Equipment

  • Belt Conveyors & Scalping Screens

    • Astec belt conveyors and scalping screens
    • Astec belt conveyors and scalping screens
    • Astec belt conveyors and scalping screens
    • Astec belt conveyors and scalping screens
    • Astec belt conveyors and scalping screens
    • Astec belt conveyors and scalping screens
    • Astec belt conveyors and scalping screens
    • Astec belt conveyors and scalping screens

    Astec inclined belt conveyors feature super-strong I-beam construction. Portable conveyors come with built-in single or double deck scalping screens. Skid-mounted, relocatable models and stationary models can also have screens mounted on their ends.

  • Drag Conveyors

    • Astec drag conveyor
    • Astec drag conveyor
    • Astec drag conveyor
    • Astec drag conveyor
    • Astec drag conveyor
    • Astec drag conveyor
    • Astec drag conveyor
    • Astec drag conveyor

    This feeder lets batch plant operators enjoy the cost savings provided by RAP (Reclaimed Asphalt Pavement). Higher RAP percentages can be used because this feeder prevents severe steam reactions, which have previously limited the amount of RAP that could be used in batch mixes.

  • Traverse Conveyors

    • Astec traverse conveyor
    • Astec traverse conveyor
    • Astec traverse conveyor
    • Astec traverse conveyor
    • Astec traverse conveyor
    • Astec traverse conveyor
    • Astec traverse conveyor
    • Astec traverse conveyor

    Horizontal traverse conveyors route the hot mix asphalt from the drag conveyor into the selected silo. Astec traverse conveyors feature the same tough construction as the drag conveyors and the same two million ton guarantee. Insulated and outfitted with hot oil heating (electric heating is optional), traverse conveyors can be built in configurations to feed up to nine silos.

  • Screw Conveyors

    • Astec screw conveyor
    • Astec screw conveyor
    • Astec screw conveyor
    • Astec screw conveyor

    Screw conveyors are used to move fine material through auger action. In Hot Mix Asphalt plants these conveyors move baghouse dust to storage or back to the mix. Zero speed switches on these conveyors alert the operator in the case of a blockage or stoppage. Astec dust screws feature extra thick shafts which eliminate hanger bearings for most models. Reduction of hanger bearings means less maintenance.

  • Bucket Elevators

    • Astec bucket conveyor

    Bucket elevators move dried aggregate to the top of batch towers. Sized to fit the facilities' output, Astec bucket elevators are designed for long service life and easy maintenance access. Super-tough wear materials and a special entry chute design make Astec bucket elevators superior performers.

  • Vane Feeders & Tipping Valves

    • Astec vane feeders and tipping valves
    • Astec vane feeders and tipping valves
    • Astec vane feeders and tipping valves

    These devices meter fine material, such as baghouse dust or lime, into processes. Gravity chutes and valves, automatic tipping valves and rotary airlocks are included in the product line. A dust blower can be part of the systems. Configurations are selected depending upon the application.

  • Batch Plant RAP Feeders

    • Astec batch plant RAP feeder

    This feeder lets batch plant operators enjoy the cost savings provided by RAP (Reclaimed Asphalt Pavement). Higher RAP percentages can be used because this feeder prevents severe steam reactions, which have previously limited the amount of RAP that could be used in batch mixes.

Before rock aggregate is mixed with other ingredients to make HMA, it is thoroughly dried. The drying and mixing process can be accomplished with one piece of equipment or the functions can be separated. Mixing can take place in a continuous process or in a batch process. Astec supplies a complete line of high-performance drying and mixing equipment to fill the varying needs of producers worldwide. Astec also provides pugmill type mixers which premix additives with rock aggregate.

  • Astec Double Barrel drum dryer mixer for producing asphalt

    Double Barrel® Drum Dryer/Mixer

    Astec brings you the Double Barrel dryer/drum mixer, the mixer of choice over any other. The Double Barrel dryer/ drum mixer combines the latest in hot mix technology with other great Astec features. Get guaranteed productivity and top quality mixes while keeping operating costs per ton of mix low and meeting the most stringent environmental codes. Stationary, relocatable and portable versions all perform to the same high standards.

    Read more...

  • Astec recycled asphalt pavement dryer mixer

    Double RAP Dryer/Mixer

    The Double RAP dryer separates the drying process from the mixing process, thereby providing a very reliable plant to be used for the purpose of recycling reclaimed asphalt pavement (RAP). The concept allows for RAP to be pre-conditioned through the external part of the Double RAP dryer, flashing off moisture in the drum, thus eliminating the problems associated with scavenger systems.

    Read more...

  • Dillman UniDrum dryer/mixer

    Dillman UniDrum™ Dryer/Mixer

    The Dillman unified drum is a high quality counter ow design that is offered in both portable and stationary arrangements. The UniDrum mixer is offered as part of complete new plants and also for retrofit applications, with a range of production capacities from 200 to 600 tons per hour (182 to 544 tonnes per hour) with 5% moisture.

    Read more...

  • Astec warm mix asphalt system

    Warm Mix Systems

    Astec can retrofit warm mix systems to continuous mix and batch plants from any manufacturer, bringing the benefits of the Astec warm mix system to all asphalt pavement plant configurations.

    Read more...

  • Astec burner for asphalt mixing plants

    Burners

    Astec burners offer the latest in reliable burner technology combined with complete one-source responsibility. With retrofit capabilities, Astec is able to offer everything from a simple burner replacement to a complete installed system. Astec's burner group engineers the burners to the specifications of each customer and manufactures each in a new state-of-the-art manufacturing facility. Prior to shipment, each burner is tested on one of Astec's three tri-fuel (oil, gas & coal) test stands to ensure fast and easy start-up at installation.

    Read more...

  • Astec sequential mixing withing an asphalt dryer drum mixer

    Sequential Mixing

    To make good mix on a consistent basis, it is essential to add materials in the right order and at the right time. That's where the Astec exclusive sequential mixing process excels. The Double Barrel® dryer/drum mixer's long mixing chamber and stationary outer shell provide the ability for adding ingredients sequentially. Ingredients are added to the hot dry aggregate in an order that allows better temperature equalization and even distribution of all particles throughout the mix which results in better consistency.

    Read more...

  • the Astec V-Pack stack temperature control system

    V-Pac™ Stack Temperature Control System

    ASTEC's patent-pending V-Pac™ Stack Temperature Control System extends the range of mixes that can be produced without requiring that the flights be adjusted. The system's "V-flights," unique drum flights with a deep V-shape, and its use of variable frequency drives (VFDs), which provide control of the drum rotational speed, are keys to the control system managing an asphalt plant's exhaust gas temperature and increasing overall efficiency.

    Read more...


Additional Equipment

  • Drum Mix Coaters

    • Astec drum mix coater

    Retrofitting an existing stationary plant with an Astec drum mix coaters (DMC) overcomes the problem many conventional mixers have with hydrocarbons and blue smoke. The coater does the mixing, leaving the drum mixer to function only as a dryer. Single-shaft coaters come in four sizes for production rates up to 525 tph. Dual-shaft coaters are available in six sizes for production rates up to 650 tons per hour.

  • Parallel-Flow Drum Mixers

    • Astec parallel-flow drum mixer

    Astec's parallel-flow drum mixer is recommended where initial cost of the equipment is an overriding consideration. It is quite suitable for applications where air pollution codes are less restrictive and high percentages of RAP will not be used. It is available in portable and stationary versions. Production rates up to 550 tons per hour are possible.

  • Aggregate Dryers

    • Astec aggregate dryer

    Astec aggregate dryers feature the same quality construction found on the Double Barrel®. Stationary dryers are used mainly with batch plant facilities. Along with a low pressure oil burner, these units come with the blower burner, automatic burner controls, burner platform, fuel oil pump and ignition platform. The drums are driven by various sized saddle chain or friction drives, based on the drum diameter. The dryers may process up to 500 tons per hour.

  • TS Batch Towers

    • Astec TS batch tower

    The batch tower and hot elevator assembly includes a 3-1/2 deck screen, four hot bins, manual sampling system, aggregate weigh hopper, and liquid asphalt weigh bucket. The dual shaft pugmill features tough Ni-hard liners and mixing paddles. TS batch towers are available in 4, 5, 6 and 8 ton sizes.

  • BGA Batch Towers

    • Astec Barber Greene Asphalt batch tower

    Astec offers the BGA batch tower series from Barber-Greene. These batch towers, now built by Astec, are smaller than the TS models and popular on the international market. Five different BGA towers are available with batch ratings from one to five tons in portable or stationary version.

  • Super Batch Towers

    • Astec super batch tower

    Super Towers can have as many as 14 bins, providing an amazing 800 tons of hot aggregate storage. This can provide enough rock to run all day without having to replenish the bins. An additional benefit of high storage capacity is the reduced need for stockpile space at the site and minimized dust created by stockpile activity. Super Towers also do an exceptional job with Reclaimed Asphalt Pavement (RAP) mixes because there is space to sandwich a RAP bin between hot aggregate bins.

  • Post Drum Mixers

    • Astec post drum mixer
    • Astec post drum mixer
    • Astec post drum mixer
    • Astec post drum mixer

    Post Drum Mixers are powerful pugmill mixers which incorporate dried aggregate and liquid asphalt to make hot mix asphalt. They can be used as stand-alone units or in combination with a dryer. By removing the liquid asphalt and recycle material from the hot air stream of the dryer, the post drum mixer eliminates emission problems associated with a conventional drum mixer. Capacities up to 400 tons per hour are available.

  • Lime Pugmills

    • Astec lime pugmill
    • Astec lime pugmill
    • Astec lime pugmill
    • Astec lime pugmill

    Lime is often mixed with aggregate to achieve a stronger bond between the rocks and the liquid asphalt. Astec lime pugmills premix the lime and the aggregate before the aggregate enters the dryer. This assures producers an even distribution of the fine lime particles throughout the mix. Slurry systems are also offered. The lime pugmills are sized to fit the production capacity of the facility.

Astec burners offer the latest in reliable burner technology combined with complete one-source responsibility. With retrofit capabilities, Astec is able to offer everything from a simple burner replacement to a complete installed system. Astec's burner group engineers the burners to the specifications of each customer and manufactures each in a new state-of-the-art manufacturing facility. Prior to shipment, each burner is tested on one of Astec’s three tri-fuel (oil, gas & coal) test stands to ensure fast and easy start-up at installation.

  • Astec Phoenix Coal burner

    Phoenix® Coal

    The ASTEC Phoenix® Coal burner utilizes an innovative combustion technology to provide a reliable alternative energy source. Thanks to the latest multiple-fuel burning technology, the Phoenix Coal burner provides dependable performance by burning coal as an alternative to oil or natural gas.

    Read more...

  • Astec Phoenix Phantom burner

    Phoenix® Phantom

    Astec’s premium Ultra-Low NOx Phoenix® Phantom burner leads the pack with the lowest available combustion and noise emissions (gaseous fuels only). The Phantom also achieves the highest electrical energy efficiency with innovations like variable speed drives and offers advanced mixing technology and the latest technological innovations to deliver the absolute minimum gaseous emissions available today.

    Read more...

  • Astec Phoenix Talon burner

    Phoenix® Talon

    The Astec Phoenix® Talon II utilizes the latest burner technology to deliver very low emissions combined with energy efficiency. With the optional silencing package, it’s even possible to have a phone conversation on the burner platform while it is firing.

    Read more...

  • Astec Phoenix Fury burner

    Phoenix® Fury

    A robust build and simple, accessible construction makes the Phoenix Fury burner a great cost-effective choice. Compared to other open-fired designs, the Fury burner achieves better emissions and fuel-efficiency by putting 50% more combustion air through the burner.

    Read more...

  • Astec Whisper Jet burner

    Whisper Jet®

    The ASTEC Whisper Jet® burner delivers unmatched reliability and hassle-free maintenance. The Whisper Jet® burner cleanly and efficiently burns oil, natural gas, or propane and its compact flame makes it compatible with virtually all drum designs without complicated adjustments.

    Read more...

  • Astec warm mix system

    Warm Mix Systems

    Astec can retrofit warm mix systems to continuous mix and batch plants from any manufacturer, bringing the benefits of the Astec warm mix system to all asphalt pavement plant configurations.

    Read more...

Astec designs equipment to control the emissions that can be created in the Hot Mix Asphalt (HMA) production process. Baghouses and cyclones capture the dust from the drying process so it can be fed back into the mix. Blue smoke systems route the haze that can escape at mix transfer points back to the burner to be incinerated, and sound suppressors minimize the sound level emitted by running machinery. This equipment lets producers continue to compete in an age of heightened environmental awareness and increased regulations.

  • Astec baghouses for asphalt plants

    Astec
    Pulse Jet Baghouses

    Astec baghouses deliver superior performance and efficiency, while helping your facility meet the most stringent clean air standards. They remove particulates from the exhaust stream to efficiencies greater than 99.5%, and lower emission to less than one quarter of EPA standards.

    Read more...

  • Dillman baghouses for asphalt plants

    Dillman
    Reverse Pulse Baghouses

    Dillman Equipment has designed the Dillman Reverse PulseTM baghouse. Modular in design, the Dillman baghouse can be tted to your exact size requirements. The Dillman Reverse PulseTM baghouse is available in a range of sizes from 5,000 to over 100,000 ACFM. It is a ruggedly constructed system; manufactured out of 3/16” corrosion resistant steel plating.

    Read more...


Additional Equipment

  • Primary Collectors

    • Astec primary collectors for asphalt plants

    Astec stand-alone vertical and horizontal primary collectors are highly efficient and easily retrofitted to existing facilities or to replace old collectors. Horizontal collectors my be skid-mounted to make them portable and to eliminate the need for concrete foundations. Vertical collectors are also available and may be mounted above the drum if necessary. Models are available 6 to 12 feet in diameter. Options include rotary airlocks, tipping valves and ceramic liners.

  • Blue Smoke Systems

    • Astec blue smoke systems for asphalt plants
    • Astec blue smoke systems for asphalt plants
    • Astec blue smoke systems for asphalt plants
    • Astec blue smoke systems for asphalt plants
    • Astec blue smoke systems for asphalt plants
    • Astec blue smoke systems for asphalt plants
    • Astec blue smoke systems for asphalt plants
    • Astec blue smoke systems for asphalt plants

    Liquid asphalt cement, the "glue" used to hold the rock aggregate together in hot mix asphalt, is a petroleum by-product. At certain spots in the process, a haze of hydrocarbon droplets can escape. This haze is called "blue smoke." Astec provides complete systems to capture and dispose of blue smoke. Silo top and loadout area systems are available. Powerful fans route the hydrocarbons either to the drum burner for incineration or to mist collection units.

  • Sound Suppression

    • Astec sound suppression for asphalt plants
    • Astec sound suppression for asphalt plants

    Expertly designed shielding devices minimize the sound level created by neighborhood asphalt facilities. Astec sound suppression equipment shields burner blowers, exhaust stacks, air compressors, and drum drives to reduce sound levels at the facility. This reduces decibel levels at the typical property boundary to that of normal conversation.

After Hot Mix Asphalt (HMA) has been produced it is either stored for sale at a later time or immediately "surged" through bins into waiting trucks. Weight of HMA truck loads is determined by either low profile truck scales or through load cells on the surge bins themselves. Astec’s pioneering efforts in HMA storage silo technology changed the way producers operate. As the first true storage system, these silos brought the economies of long production runs to the HMA industry.

  • Astec New Generation hot mix asphalt (HMA) storage silos for asphalt plants

    HMA Storage Silos

    Astec hot mix storage systems come complete with drag conveyors, traverse conveyors and batchers. Bucket elevators are available. Standard design is to Seismic Zone IIA conditions and 150 miles per hour wind velocity. Our structural engineering staff will design your foundations based on soil conditions at your site.

    Read more...

  • Dillman Silo Systems

    Dillman Silo Systems

    Maximize production capabilities and reduce segregation with an advanced silo system from Dillman. Engineered for maximum performance and manufactured for years of reliable service, a Dillman Silo System is built to provide the highest efficiency at the lowest possible cost.

    Read more...

  • Astec self-erecting bins (SEB) for asphalt plants

    Self-Erecting Bins

    The super functional SEB package combines several operations into a single unit: drag conveying, batching, surge/short term storage, truck loading and weighing. One truck brings the SEB to your site. Built-in running gear with airbag suspensions make moving easy. Hydraulic cylinders raise the portable unit into place.

    Read more...


Additional Equipment

  • Truck Scales

    • Astec truck scales for asphalt plants
    • Astec truck scales for asphalt plants
    • Astec truck scales for asphalt plants
    • Astec truck scales for asphalt plants

    The Astec Weigh Mate is a totally electronic, low-profile truck scale that comes in length up to 140 feet and capacities up to 500 tons. Externally mounted shear beam load cells are connected to data collection terminal and ticket printers and can be matched to all digital readout units. Depending on length, the scales have between four and ten load cells. The scales are wired in conduit. Checkered steel deck plates and extra wide heavy flanges make the scales sturdy and durable.

  • Additive Systems

    • Astec additive systems for asphalt plants
    • Astec additive systems for asphalt plants
    • Astec additive systems for asphalt plants
    • Astec additive systems for asphalt plants

    Silos for dry additive are used for mineral filler, dust or lime in drum mix plants or batch plants. The silos comes in six different sizes, from 350 to 900 BBL capacity. Options include leg extensions, baghouses, self-erect and portability packages. Liquid additive systems are also offered. They are skid mounted and come complete with system controls, pumps valves and hot oil coils for materials that require heat. Liquid systems come in either 1,000 or 2,000 gallon size.

Astec provides the software and hardware required to control and manage Hot Mix Asphalt (HMA) facilities and constantly evolves better and simpler systems. Astec's own programs run through Microsoft Windows and efficiently control all material flows, processes, weighing and ticketing of Hot Mix Asphalt continuous or batch facilities. These controls can be supplied as retrofits for existing installations or as complete systems in a fully equipped control house.

PM96 Final Memo: Please read the latest memo concerning the future development of the PM96 for customers who currently use this system. Read more...

PM96 Memo: Please read the latest memo concerning the future development of the PM96 for customers who currently use this system. Read more...

  • Astec TCII asphalt plant control system for asphalt plants

    TCII

    The TCII is the most powerful PC-based system ever designed to control hot mix asphalt plants. With these centralized controls you will have instant and accurate control of all facility operations. No other system provides you with more flexibility and expansion options.

    Read more...

  • Astec TCII batching control system for asphalt plants

    TCII
    Batching Controls

    The TCII Batch System controls and monitors several essential facility functions including proportional control of aggregate feeders and the blending of asphalt and additives.

    Read more...

  • Astec BC3300 Base Burner Control for asphalt plants

    BC3300
    Base Burner Control

    An economical choice for base burner controls and an ideal retrofit, the BC3300 features rugged, time tested, reliable temperature and flame safe guard components.

    Read more...

  • Astec PMII-A Continuous Mix Blending Controls for asphalt plants

    PMII-A
    Continuous Mix Blending Controls

    PMII controls and monitors proportional control of aggregate feeders and the blending of asphalt, recycle, shingles, and additives. PMII is ideal for retrofit applications or it can be custom configured to work the WM2000.

    Read more...

  • Astec PMII-B Continuous Mix Blending Controls for asphalt plants

    PMII-B
    Continuous Mix Blending Controls

    PMII controls and monitors proportional control of aggregate feeders and the blending of asphalt, recycle, shingles, and additives. PMII is ideal for retrofit applications or it can be custom configured to work the WM2000.

    Read more...

  • Astec PMII-C Continuous Mix Blending Controls for asphalt plants

    PMII-C
    Continuous Mix Blending Controls

    PMII controls and monitors proportional control of aggregate feeders and the blending of asphalt, recycle, shingles, and additives. PMII is ideal for retrofit applications or it can be custom configured to work the WM2000.

    Read more...

  • Astec WM2000 Truck Management System for asphalt plants

    WM2000
    Truck Management System

    Astec's state-of-the-art truck management system supports up to six scales that can be any mix of platform, back weigh or weigh batcher. The WM2000 can be retrofitted to virtually any facility and supports data transfer back to accounting, even from remote locations.

    Read more...

  • Astec accu-swipe belt sampler for asphalt plants

    Accu-Swipe™
    Belt Sampler

    The belt sampler simplifies the quality control function at the hot mix asphalt plant. Mounted over the aggregate conveyor it automatically provides representative material samples for laboratory analysis without interrupting production.

    Read more...

  • The Source diagnostic tool by Astec, Inc.

    The Source

    The Astec Source Tool is a new diagnostic tool to simulate most signals coming into any brand asphalt plant control system without having to have the plant running.

    Read more...