The Astec Phoenix Talon utilizes the latest burner technology to deliver very low emissions combined with energy efficiency. With the optional silencing package, it's even possible to have a phone conversation on the burner platform while it is firing.

The swirler and other components of the nose ensure flame stability and optimum shape.

The Phoenix Talon uses significantly less electric power than conventional burners due to the variable frequency drive used to control its combustion air blower and low body pressure.

The Phoenix Talon's compact flame shape is compatible with most drums without complicated flame adjustment.

Advanced Emission Reduction

The Phoenix Talon series uses precise, high quality mixing of air and gaseous fuel to achieve remarkable emission reduction. Radial gas injectors thoroughly mix air and fuel for low CO and NOx emissions. The advanced emission technology is not limited to gaseous fuel. The advanced compressed air, oil nozzle and air swirler design achieves self-recirculation and very rapid burning for some of the lowest oil firing emissions available today.

Electric Power Efficiency

The variable speed main combustion blower drive helps provide precise firing rate control and uses significantly less electrical energy. It also eliminates the need for an air damper and for drive motor adjustments and maintenance.

Firing Efficiency & Compact Flame Size

High quality mixing of air and fuel creates the most compact flame available with a small combustion zone. This insures that all of the fuel is combusted for peak efficiency without taking away valuable dryer heating capacity.

Reliable Firing

For maximum reliability and start-up ease, all Astec burners are thoroughly tested before shipping.

LOW EXCESS AIR FIRING SPECS
	Rated Capacity MBTU/HR (with 20% XSA)	Nominal Aggregate Drying Capacity at 5% Moisture (tph)	Burner Air Capacity SCFM	Integral Blower Horsepower
					Oil Atomizing Air Requirement SCFM
					Low Fire	High Fire
	50	200	11,083	40	100	80
	75	300	16,667	60	100	80
	100	400	22,083	75	100	80
	125	500	25,150	100	100	80
	150	600	33,333	125	125	90
Above conditions are standard at 70° at sea level. See detailed capacity, performance sheets for each size for more information and specific flows and pressures. Nominal aggregate drying capacity based on typical exhaust stack temperatures of 240° F, 0.2 BTU/Lbm F specific heat in the aggregate. Burner maximum design capacity is the same as its rated capacity.